PETHE INDUSTRIAL MARKETING COMPANYP.LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to PETHE INDUSTRIAL MARKETING COMPANYP.LTD.
A.C. Electromagnetic Disc Brakes
|
|
| Introduction : | |
| These brakes are also called Normally ON type, failsafe spring loaded disc brakes. Very compact and modern in design. Foundation is not necessary as they are mounted directly on the non-driving end shaft of the motor. It consists of liner plates (friction disc) with square hole at the centre. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and liner plate is free on the hub. Normally, liner plate is gripped between two discs with the help of spring pressure. | |
| When current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus the brake is OFF. Once the brake is set it does not require adjustment or maintenance. When the liner plate wears with the use, then only air gap is required to be maintained periodically. Arrangement to release the brake manually is also provided. | |
| Electromagnetic Disc Brake (A.C.) supplier and manufacturer Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer and supplier of Electromagnetic disc brake (A.C.) in Mumbai, Maharashtra, Gujarat, Delhi, Pune, Bangalore, Chennai, Ahmedabad, Kolkata, Baroda, Hyderabad, Latur, Nagpur, Udaipur, Telangana, Vijaywada, Surat, Rajkot, Bhopal, Coimbatore, Raipur, Ranchi, Faridabad, Noida, Ghaziabad and all over India |
D.C. Electromagnetic Disc Brakes
|
|
| Introduction : | |
| These brakes work on 24 / 42 / 190 VDC. Very compact in design. Foundation is not necessary as they are mounted directly on the non-driving end shaft of the motor. It consists of liner plates (friction disc) with square hole at the centre. One corresponding piece of square hub is supplied with the brake. This hub is keyed to the motor shaft and liner plate is free on the hub. Normally, liner plate is gripped between two discs with the help of spring pressure. | |
| When current is supplied to the brake, one disc is attracted by electromagnet against spring pressure and the liner plate is released. Thus the brake is OFF. Once the brake is set it does not require adjustment or maintenance. When the liner plate wears with the use, then only air gap is required to be maintained periodically. | |
| Arrangement to release the brake manually is also provided. We provide a rectifier-transformer for converting AC voltage to DC voltage. These brakes should not be used for inching operation since they are slightly sluggish. | |
| Electromagnetic Disc Brake DC supplier and manufacturer Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer and supplier of Electromagnetic disc brakes dc in Mumbai, Maharashtra, Gujarat, Delhi, Pune, Bangalore, Chennai, Ahmedabad, Kolkata, Baroda, Hyderabad, Latur, Nagpur, Udaipur, Telangana, Vijaywada, Surat, Rajkot, Bhopal, Coimbatore, Raipur, Ranchi, Faridabad, Noida, Ghaziabad and all over India |
D.C. Electromagnetic Disc Brakes With Handle
|
|
| Introduction : | |
| In the power OFF state the compressing springs press the armature disc and rotor against attachment surface. The geared hub is firmly locked on the shaft and rotor slides over the hub. On applying rated direct current voltage to the stator the magnetic field produced will pull the armature discs over air-gap towards stator against spring force. Thus the rotor is released allowing shaft to rotate. | |
| In the event of continuous power failure, the rotor can be freed by pulling the hand release of dead man type. The hand release goes back automatically to its original position and brake will immediately revert to its safe action. | |
| Electromagnetic Disc Brake DC With Handle supplier and manufacturer Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer and supplier of Electromagnetic disc brakes dc with handle in Mumbai, Maharashtra, Gujarat, Delhi, Pune, Bangalore, Chennai, Ahmedabad, Kolkata, Baroda, Hyderabad, Latur, Nagpur, Udaipur, Telangana, Vijaywada, Surat, Rajkot, Bhopal, Coimbatore, Raipur, Ranchi, Faridabad, Noida, Ghaziabad and all over India |
Electromagnetic Shoe Brakes
|
|
| Introduction : | |
| The shoes and the base of brakes are of graded cast iron. Other components are of fabricated steel. The lever is hinged on the main arm, which is connected to the side arm through a tie rd and is stressed by a pre loaded compression spring. The compression of the spring can be adjusted to set the braking torque to desired value. The brake liner is of selected quality material and is riveted to the shoes by rivets. | |
| The brake is fail to safety. The brake is in applied condition in absence of AC current and is released when the supply is restored. High quality lining material ensures consistent braking torque and reliable operation. Clean environment working and less noise are its specialties. Braking torque can be adjusted easily and quickly. Ease of maintenance. | |
| Arrangement to release the brake manually is also provided. We provide a rectifier-transformer for converting AC voltage to DC voltage. These brakes should not be used for inching operation since they are slightly sluggish. | |
| Electromagnetic Shoe Brakes supplier and manufacturer Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer and supplier of Electromagnetic shoe brakes in Mumbai, Maharashtra, Gujarat, Delhi, Pune, Bangalore, Chennai, Ahmedabad, Kolkata, Baroda, Hyderabad, Latur, Nagpur, Udaipur, Telangana, Vijaywada, Surat, Rajkot, Bhopal, Coimbatore, Raipur, Ranchi, Faridabad, Noida, Ghaziabad and all over India. |
Electromagnetic Normally Off Type Brake
|
|
| Introduction : | |
|
These are normally Off type brakes are designed to have a stationary coil, Single surface plate and are used in dry conditions. They are light in weight, compact and have high torque at low wattage. There are two major parts to a Brake : Stator (Brake Body) in which the magnetic coil is fitted and the Armature Plate which is fitted on the Driven shaft. The brake body is bolted to a stationary surface. In normal condition, the brake is not in the applied condition and thus the driving / driven shaft is free to rotate. When the brake coil is energized the armature plate is attracted towards the brake body and comes to an instant stop. When the electric supply is cut off, the brake is released by a pre-stressed sinusoidal wave spring on the armature plate. |
|
| Electromagnetic Normally Off Type Brake supplier and manufacturer Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer and supplier of Electromagnetic normally off type brake in Mumbai, Maharashtra, Gujarat, Delhi, Pune, Bangalore, Chennai, Ahmedabad, Kolkata, Baroda, Hyderabad, Latur, Nagpur, Udaipur, Telangana, Vijaywada, Surat, Rajkot, Bhopal, Coimbatore, Raipur, Ranchi, Faridabad, Noida, Ghaziabad and all over India. |
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
